VDE-approved; perfect for under-ceiling installation
3-phase full electronic power operation
Full electronic control
Energy-efficient IES® bare wire heating system
Perfect for under-ceiling installation;
a revolution in compact VDE-approved water heaters
Multiple Power System MPS®: power rating can be set between 16.2-19.4 and 19.0-22.6kW (380-415V) on installation
TWIN TEMPERATURE Control (TTC®) for precise hot water outlet temperatures between maximum operating range of 20°C-60°C
Automatic regulation under variable inlet pressure and inlet temperature, subject to selected user pre-settings for economical, energy-efficient use
Compatible with solar heating system; suitable for pre-heated water at inlet temperatures of up to 70°C (automatic safety switch off if exceeded; restart after)
Single or multi-point application above or below kitchen or bathroom outlets for showers, sinks, and wash basins
Wireless remote control with one-touch access to your personalized temperatures and 2 memory settings
100% engineered, produced, and made in Germany
Specifications
Information
Model / Sub-Model
CFX21-U
Power Setting
18 kW | 21 kW
Voltage
380 - 415 V
Electric Power
23.4 - 28.0 A | 28.8 - 31.4 A
Power (Max)
16.2 - 19.4 kW | 19.0 - 22.6 kW
Power Supply
3 Phase
Hot Water Flow Rate Per Minute*
10.7L at 21kW (flow limiter 8L/min)
Min-Max Flow Rate
2-8 L/min
Required Cable Size
4 mm²
Colour
White
Dimensions
(H) 294 (W) 177 (D) 108 mm
Packing Dimensions
(H) 390 (W) 235 (D) 145 mm
Net Weight
2.8 kg
Net Weight: Filled with Water
3.1 kg
Functions
Temperature Adjustment
20-60 °C
Testing Pressure
10 Bar
VDE Approval / Class
IP 24
Country of Origin
Germany
Others
Warranty Term
3 Years
Certification / Standard
VDE/EMC, VDE/GS
Other Certification
CB/ISO
Upon purchases made after 1 November 2015, customers will enjoy a 3-year warranty on all parts plus free on-site and parts replacement services in the first year.
* Temperature increase @ Δt=28K e.g. from 12 to 40°C.
Under normal working conditions, incoming pressure should not exceed 0.6 MPa. Otherwise, a separate pressure control device is necessary. When incoming water pressure exceeds 0.6 MPa, German Pool will not provide any repair service until a pressure control device is installed.
Specifications are subject to change without prior notice. Please refer to the Instruction Manual for Warranty Information.